GoPro neck mount

Notes:

• 2023/8/20 update: Added the “Updated print files” folder. The new files have added chamfers, improving wearer's comfort.
• 2024/1/24 update: I've uploaded an improved version of this design. It's more sturdy, more comfortable to wear, and the circumference is customizable.

Instructions:

• Material:
  • Tested with PLA and PETG, at 20% infill, without support, both material are strong enough for regular use.
• Hardware:
  • The neck hoop requires a M5 nut, the nut is designed to stay tightly in the print. Use a drop of superglue if the nut is loose in your print.
• Choosing the right size:
  • Use a sewing tape measure to measure the neck circumference, refer to the conversion chart, then print the right size from the Sizing files folder.
  • Try the test print on your neck, move your head aroud and see if the hoop cause  any discomfort, try out a larger or smaller size accordingly.
  • After confirming the right size for you, print the actual mount from the Updated print files folder.

• Circumference to diameter conversion chart: