Dyson V7, V8 and V10 adapter to Roborock S7 dustbin

This is a quick and dirty remix of the Dyson V7, V8, and V10 adapter to the Roborock S7 dustbin.

 

Instructions for printing:
 

To print this, I used the PrusaSlicer Alpha3 to create organic supports from the build plate only.

It easily came off in one piece without tuning, which is a godsend!

 

If you don't have a prusa slicer, you can use another type of tree support in Cura or bamboo slicer.

Material:

PETG is recommended but not required, ABS and PLA can also be used.

Note:

The top part of the bin is rotated 180 degrees in the image, but it is fixed in the currently uploaded model so you don't have to turn the bin upside down to vacuum it. Since the first one I printed worked I did not bother printing it again, post your makes! :)

Remix sources:

• https://www.printables.com/model/383503-roborock-s7-vacuum-cleaner-adapter-for-dustbin
• Pintables does not let me post the second source from cults3d so here it is:
  
  https://cults3d.com/en/3d-model/home/dyson-v7-v8-v10-universal-adapter-different-nozzles-and-univeral-adapter-for-34mm-outer-or-40mm-inner-diameter