The Rise Of the Shield Hero Shield Key Chan

This Keychain was designed after the sheld used by Naofumi Iwatani in the light novel, anime, and manga "The Rising Of The Shield Hero". I used a reference image I found online to do my best to accurately portray it. the images of what I made had a 3D printed one with no additions (besides the bead) to the right and the one to the left is the one I put on my bag that I put aluminum tap on to give it some shine. the bead I used is just some green paper with some superglue bubbled on top and hardened with
accelerator from a hobby shop near home. the bead is just under 7mm in diameter.

I used Fusion 360 to design the accessory. my drawings for the design are a bit sloppy but I've added the file for the Fusion 360 design if you wanted to make changes to it.

Print instructions

Category: Accessories Summary

you can print this in two parts and put them together or if you have the capability to print it as one part. I recommend printing with the back to the print bed. I found if you print it as two parts you won't need glue. the detail fits snuggly into the main shield

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Yes

Supports: Doesn't Matter

Resolution: 1.5

Infill: 5%