LA1.5 k-factor calibration

This is an advanced calibration, recommended only to experienced users. For more information, read
this article.

Material Layer height | Fastest speed | PrusaSlicer profile

</tr>
0.2mm | 45mm/s
QUALITY 0.2mm | 60mm/s
SPEED 0.3mm | 50mm/s
DRAFT
PLA

Download
Download
Download
</tr>
PETG Download Download Download
ASA Download Download Download
PC Download Download Download
NYLON Download Download Download
ABS Download Download Download
HIPS Download Download Download
</table>

If your usual printing temperatures differ feel free to modify the G-Code lines to your needs.
Change the "S" values:

M104 S215 ; Set nozzle temperature (no wait)
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; Wait for nozzle temp

If you have custom printing profiles and you want to generate your own LA15 K-factor values visit the community Marlin k-factor generator Prusa Edition and download at least all '*.js' and the 'k-factor.html'. You can open the k-factor.html in your local browser and enter your values. This is based on Marlin k-factor generator with Prusa specific G-codes and settings.

Naming convention for the G-code files:
LA1_5-"Filament"-"Hotend temp"C-"layer height"mm-"fastest perimeter printing speed"-"Extrusion multiplier"E_mult-"Prusa Slicer Printing profile"-"Printer type"-cal-kfactor.gcode

Example:
LA1_5-PLA-215C-0_2mm-60mms-0_95E_mult-SPEED-MK3S-cal-kfactor.gcode is:

• Linear Advanced 1.5 k factor pattern
• for PLA
• with 215°C hotend temperature
• at 0.20mm layer height
• fastest perimeter speed 60mm/s
• Extrusion multiplier
  • Normally it is based on the Filament Extrusion multiplier setting (default 1).
  • But there is some custom/modifying g-code in the Prusa Slicer Original Prusa i3 MK3S profile that changed it from 1 to 0.95
• based on Prusa Slicer 0.20mm SPEED@MK3 Printing profile
  • which has also custom/modifying g-code to set different E stepper motor currents.
• on a MK3S printer.

Please visit following websites
for more information:
https://marlinfw.org/docs/features/lin_advance.html

These G-code files have been generated with a modified version of Marlin K-factor generator.

Preview gcode:
http://gcode.ws/
https://ncviewer.com/

Print instructions

Before you print this G-code make sure that you have dialed in the Live-Z as optimal as possible.
Too squished layers will make the determination of the LA1.5 k-factor value really hard.