Bumpercase for Google Pixel 6

This Case is designed as flexible Bumpercase to protect your Google Pixel 6 against minor impacts and hits.

The backside is as thick as the camera kit protrudes, so you have a homogeneous flat surface.

It has cutouts for the speaker / microphone and charging socket. Areas for the ON/OFF and volume control buttons are slightly elevated so you can find them even by feeling.

It will fit for Google Pixel 6, only. It will not fit for Google Pixel 6a or Google Pixel 6Pro.

Print Instruction:

I recommend to use the pre-sliced *.3mf file since I made adaptions on the perimeters to get best bumper performance.

I every case use TPU or FLEX Filament. I didn't try it, but you might wont be able to mount your Phone in the Bumpercase if PLA, PETG, etc. would be used.

Nice to have, but not mandatory: Use the textured PEI Sheet, for a nice look and feel.

Version 1.1 - 15. Feb. 2023 / Slicer: PrusaSlicer Version 2.5.0