Barracks, Bottom box for the Rook [MK1]

Designed the Barracks, a box for the Rook with modular tool-less drawers in the back to make it easier to modify to your components. Each drawer fits a full Pi if needed. I only included a blank drawer, if you need one customized, contact me and i can help you.

Features a fan-spot in the lid, designed to pull air trough the front opening, over all the components. The lid can be mirrored in your slicer to move the fan-hole to the other side if needed. 
Print the front mesh with no top/bottom layers and glue in place.

The Rook logo on the front has built in supports, no supports needed on any parts.

2 versions, one with holes if you want to fit a screen-box in the front, and one without. The one without still has markings on the inside for you to drill out the holes if you decide to fit a screen later on. 

Idesigned the holes to fit this 12864 mount by xbost but you can customize any screen to fit.

I included an adapter for a SKR mini because it seems like that is a common board for the Rook, but any adapter for the original base should fit as it uses the same mount-holes.

Uses m3 threaded inserts and M5 screws for the feet (original mounting holes for the feet)

EDIT:
Uploaded the Step files for anyone that want to adapt this to suit your needs.

Thank you to conscriptedtraveler, Hi im jake, and Gulsifer along with the rest of the fantastic folks over on the Rolohaun Discord for the input and advice!

Like my work? Support me on Ko-fi!