Milwaukee M12 Fuel Bit Holder

A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools. Mounts using the stock clip mount--either in place of, or on the other side of, the stock clip.

A right and left STL is provided to fit either side or the orientation of your choice.

Use the existing mount screws or a M2.5×6 pan- or socket-head screw.

Print instructions

Just about any settings will work fine. Print tab-down with the bit recesses oriented vertically. The 3mf file includes both STLs oriented correctly--delete the part you don't need.

Even PLA produces a usable part. More perimeters lead to a stronger part--3 is sufficient, but 4 would probably be stronger.

Supports are minimal and recommended unless your printer is the king of overhangs.