House/Flat/Appartment Sign Number Set

A set of number tiles (and the letters A, B, C and D) for generating a house number plaque from 1 to 4 digits long (e.g. 846B).

A 1, 2, 3 and 4 tile plaque is included, so choose the right plaque for the length of your house number and then select the digits accordingly.

Each digit tile is 82.5mm high x 60mm wide.

Print instructions

The digits need to be printed with a mid-print colour change, so that the numbers can be seen clearly seen against the background. This is really easy to do in PrusaSlicer if you follow this guide here: https://help.prusa3d.com/en/article/color-change_1687

I prefer to print the digits the same colour as the plaque surround, with a good contrasting colour for the digit background.

The plaque fits to the wall with 4 countersunk screws.
The digits can then be attached using glue or double-sided tape.

PETG or ASA may be a better choice than PLA, as this object is most likely to be positioned outdoors.