Sageta Vase

A vase influenced by mental pictures of ancient pottery and a bit of research.
Created it a long time ago while learning FreeCAD.

Print it in Vase Mode / Spiralize outer contour. Should also work fine if you scale it.

Printed it with Fiberlogy Ruby Red PLA and Norditech Marble PLA.

Layer height: 0.2mm
Nozzle: 0.4mm
Wall width: 0.8mm

If you like it and print it, please upload a make, really curious what size/material you pick for it! Thank you!

Thingiverse link here