Sidedoor (sheets and support) for Original Prusa Enclosure

I wanted to make an door at the (long) side of my original prusa enclosure. Therefore I needed a drawing of the original frontdoor, to modify it. Unfortunateley this is not available. 

So I measured the original sheet, redrew it, and modified it for the long side. Note, that there is a version with, and one without the handle on top.
You can find the files for the original front door here: https://www.printables.com/de/model/398088-frontdoor-sheets-and-support-for-original-prusa-en 

I also designed the vertical support-bar to print out (two parts because of size). Of course it is not very stiff in plastic (originally metal), but looks good. :-D

For all other door parts like hinges and handle, use the original ones: https://www.printables.com/de/model/251931-original-prusa-enclosure-printable-parts 

The Sheet should be a 3mm PETG sheet. I cut a template from cardboard with a lasercutter and transferred it to the sheet. I then cut the sheet with a scroll saw - which worked surprisingly well. (I cant cut this sheets with my lasercutter)

I printed the support-bar also in PETG.
For the version with handle: print all four parts once.
For the version without handle: print support_A and support_B each twice.

Because i redrew this file from measurements, it is not 100% perfect, but it works good.

Note: I have received permission from prusa support to publish these files.