Snorlax Keycap LowPoly

The laziest Keycap on earth, the Snorlax Keycap

 ( I hardly recommend not smashing this keycap because you may get hurt and you will wake up Snorlax)

Settings

0.1mm for better quality 

15 infill ( it doesn’t matter but I recommend not going less than 15% infill)

Support aren’t needed for the Keycap as long as you add a brim but be careful with the arms of the snorla, they may need some custom supports/ good cooling during printing.

Thank you for your attention and…….

Happy Printing