Blank XDA profile Keycaps

Two different versions of XDA keycaps, modeled with FDM printing in mind. They are compatible with Cherry MX switches.

Since we couldn't find any official documentation of the XDA profile, we made two different versions of the model, matching what we see from commercial keycaps. There is a more rounded version and a squared version.

You can choose any of the two as you prefer :)

Both have a flat top, so you can print them upside down, and add any logo, or custom image on the first layer.

Print instructions:

Print at low speed, and 0.15 mm layer height or lower for best results.

We only tried using a 0.4 mm nozzle, and PLA filament. We got better results when printing on the colder end of the temperature range for the filaments we used.

Depending on your filament, you may need to scale up or down slightly on the XY plane to adjust the clearance for inserting the switches. The published models have the dimensions that worked for us.

Happy printing!

If you print this, let us know! Tag us on Instagram and we will feature your print :) Or you can leave us a review here. It really helps us improve our models 👍

Follow us on Instagram!

If you really like what we are doing and want to support us, you could buy us a coffee or two!

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!

If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]