Corner shelf

This is a corner shelf designed to be held in place with glue.  Its intended use is for RVs where thing walls make invasive mountings undesireable.

Materials: Avoid brittle materials.  If using for its intended application, heat tolerant materials are recommended.

Note: Intended orientation of installation is with the side panels downward so there is a lip on the shelf to prevent things from sliding off in a slightly unstable environment like an RV.  The shelf should work inverted as well.

Instructions:

• Align one of the side panels as your bottom (these have two ribs facing the inside of the shelf.
• No supports should be required.
• Consider using a raft if your material and printer have any adhesion issues.
• Sand the outside of the side panels to improve surface area contact.
• Use glue or strong double sided tape to mount your shelf.