Rugged filament sample box | Remix

This is combination of remixed and original files. This box holds 30 filament samples.

Box, lid and latches are unmodified, samples are redesigned to fit box better. Insert is completely original design.

To assemble you need 6 x M3 30mm screws. Depending on your printer accuracy, insert might be a little tight fit but it should just to be pressed in place, as down as it goes.  

EDIT: Made little fixes to the box. There was weird overhang, but now it's fixed.

EDIT  2: Added modded insert. Made it bit more open and faster to print.

Print settings

Box

• 0.2mm layer hight
• No supports

Latches

• 0.2mm layer hight
• solid 5 walls to get more rigid

Insert

• 0.28 layer hight for faster printing
• 12% infill
• 2 walls

Samples 

• 0.2mm layer hight
• 2 walls 
• 12% infill

Combined and changed these models to one