Slide-on khominhvi's Camera Mount
Khominhvi's pi camera mount is the only bed camera mount I could find for the Prusa i3 MK3 that didn't end up touching…
0
11
0
96
updated
February 12, 2023
Description
PDFKhominhvi's pi camera mount is the only bed camera mount I could find for the Prusa i3 MK3 that didn't end up touching the left Z axis motor and didn't end up hitting the plexiglass windows of a lack enclosure.
The only problem I encountered was it would mean having to detach the heated bed from the Y carriage to install this arm.
I didn't want to bother with that, so I imported the mount to Tinkercad and modified it so I could just slide it over the Y carriage. I also added grooves to allow for fastening it in place using a ziptie.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
25% cubic
Filament: Amazonbasics PETG black
Notes:
- Use 3 perimeters for increased rigidity choose an infill pattern that gives a rigid result in all directions. I chose 25% cubic for this, to prevent vibrations from rapid small bed movements traveling to the camera. I didn't need supports for this print, but I did bump up the amount of solid top and bottom layers. In Slic3r, enable "detect bridging perimeters" and "Extra perimeters if needed"
Tags
Model origin
The author remixed this model. Imported from Thingiverse.
