Requested and Retired parts

***Don't forget to leave a like if you value this listing.*** 

Requested and Retired parts- NOT A MODEL! Just random parts people requested and a few retired parts that might still be useful.  (Links are Amazon affiliate)

Remember to block supports below screw holes. Otherwise The support is likely to fill hole

(* =without supports)

001- *Rock Hopper Camper Main cab/without supports

002- *Rock Hopper Camper Rear cab/without supports

003- *Rock Hopper Front box/without supports

004- *Rock Hopper Front box without tanks/without supports

005- Rock Hopper Front box without tanks

006- Rock Hopper Right Fender (old screw pattern)

007- Rock Hopper Left Fender (old screw pattern

----------------------------------------------------------------------------------------------------------------

12 mm hex hub conversion   *** See pictures in listing!! ***

Need:

Two 10x15x4 bearings - https://amzn.to/3TbMKK0 

Two 5x11x4 bearings - https://amzn.to/4g1l44B 

Two - Axle Stub https://amzn.to/3AJWZiz 

008- Rock Hopper 12mm wheel conversion 008ArmLowerHexLeft 

009- Rock Hopper 12mm wheel conversion 009ArmLowerHexRight

010- Rock Hopper 12mm wheel conversion 5mm offset 010ArmLowerHexLeft 

011- Rock Hopper 12mm wheel conversion 5mm offset 011ArmLowerHexRight 

112- Rock Hopper 12mm wheel conversion 10mm offset 10ArmLowerHexLeft

113- Rock Hopper 12mm wheel conversion 10mm offset 011ArmLowerHexRight

114- 014BearingRetainer

----------------------------------------------------------------------------------------------------------------

101-A 90% tire  1:8 Scale car trailer Wheel Outer (scale this tire to 90%)

101-B 90% tire  1:8 Scale car trailer Wheel Inner (scale this tire to 90%)

----------------------------------------------------------------------------------------------------------------

301- *Thumper Tub Rear/without supports 

302- *Thumper roll bars/without supports 

303-  FrameRearLeft Old style 

304-  FrameRearRight Old style 

305- Thumper right front axle over size nut recesses 

306- Thumper left front axle over size nut recesses 

307- Thumper rear steer axle right over sized nut recesses

308- Thumper rear steer axle left over sized nut recesses

309-  Thumper AxleHousingRearLeft7x14x5 (Adapted to use 7x14x5mm bearing) 

310- Thumper AxleHousingRearRight7x14x5 (Adapted to use 7x14x5mm bearing) 

311- Thumper AxleHousingFrontLeft7x14x5 (Adapted to use 7x14x5mm bearing) 

312- Thumper AxleHousingFrontRight7x14x5 (Adapted to use 7x14x5mm bearing) 

313- Thumper AxleHousingRearSteerLeft7x14x5 (Adapted to use 7x14x5mm bearing) 

314- Thumper AxleHousingRearSteerRight7x14x5 (Adapted to use 7x14x5mm bearing) 

315- Thumper Transmission Motor gear 18T ( no M2.5 screws required!)

316- Thumper Transmission Motor gear 22T ( no M2.5 screws required!)

317- Thumper - Retired- Old style seat

319- Thumper Rear Axle Center- Looser bearing holes. (Thumper rear only)

320- Thumper and Morrigan Axle Center- Looser bearing holes. (Thumper front- Morrigan Front and Rear)

321- Original TubFront - No holes for door hinge

322- Original TubRear- No holes for top options- less support adhesion 

323- Thumper and Morrigan Reverse Hub- Studs in hub - Nuts hold wheel on

500- Glade Runner- Cage left looser slide fit

501- Glade Runner- Cage Right looser slide fit

*502- Glade Runner- Cage No supports

*503- Glade Runner- Cage Left No supports

*504- Glade Runner- Cage Right

*505- Glade Runner- GrabRailRear2X

*506- Glade Runner- GrabRailMiddle2X

*507- Glade Runner- GrabRailFrontLeft

*508- Glade Runner- GrabRailFrontRight

*509- Glade Runner - Cage two part without supports 

*510- Glade Runner - Cage two part without supports

511- Glade Runner - loose fitting slides

512- Glade Runner - loose fitting slides

513- Glade Runner - loose fitting slides

514- Glade Runner - loose fitting rear fin slide

515- Glade Runner - loose ball joints 

516- Glade Runner - Wide console for wider switch 18mm 

600- Big Chill - RailLeft2Loose - loose fitting Rail

601- Big Chill - RailLeft3Loose - loose fitting Rail

602- Big Chill - RailRight2Loose - loose fitting Rail

603- Big Chill - RailRight3Loose - loose fitting Rail

604- Big Chill - Top Binder - loose fitting

700- 

701-  SandPiper- tighter ball joints -AframeUpperBallL

702- SandPiper- tighter ball joints -AframeUpperBallR

703- SandPiper- tighter ball joints - AframeLowerBallR

704- SandPiper- tighter ball joints - AframeLowerBallL

*705- SandPiper - RearCage - No Supports 

706- SandPiper simple   SpindelL (use M3 x 16mm screws top and bottom) 

707- SandPiper simple   SpindelR (use M3 x 16mm screws top and bottom) 

710- SandPiper tighter belt BeltCover 0.5mm tighter. 

711- SandPiper tighter belt BeltCover 1.0mm tighter. 

715- SandPiper loose Link - Link62

716- SandPiper loose Link - Link53

717- SandPiper loose Link - Link41

900- Ball joint end - ball mount hole 3mm- use with 4mm threaded rod. 

__________________________________________________________________________________________________________________

Under sized ball joint to prevent welding: You want these as tight as you can get them without welding. You might have to break them free. 

Thumper:

A Thumper Rear Links Under sized ball for looser pint. (under 0.1mm or 0.2mm)

B Thumper Front Links Under sized ball for looser pint. (under 0.1mm or 0.2mm) 

C Thumper Rear Steer Links Under sized ball for looser pint. (under 0.1mm or 0.2mm) 

D Thumper Old transmission gears (Use these if you want looser belts)

Morrigan:

E Morrigan Front 125mm Links Under sized ball for looser print (under 0.1 or 0.2)

F Morrigan Rear 150mm Links Under sized ball for looser print (under 0.1 or 0.2)

G Morrigan Link 77mm Links Under sized ball for looser print (under 0.1 or 0.2)

Transmission: A- AA Crawler

H 0.2mm over sized bearings (looser fit)

J 0.4mm over sized bearings (looser fit)

K Glade Runner Cage left and right looser fit,