Zinc 2.0 Improved Custom Slide

This model is designed for easier print of the Zinc 2.0 slide. Some cosmetic changes were made, as well as larger tolerances for the plunger tube, plunger rod, and magnets. The hole to see through to the plunger tube was also removed. 

Print settings:

Please refer to the Zinc 2.0's print guide for printing. Use PETG, and for extra good quality use supports on the front of the slide where the catch is installed to produce better overhangs. Printing with a brim is also recommended to prevent delamination. The supports are fairly easy to remove, they were able to just snap off for me and needed marginal cleanup with an exacto knife.