6 Bay ITX NAS

Require at least 260 x 260 mm bed, as the case are printed in 1 main pieces. hardware required:

• 1x ITX Motherboard with at least 6 port SATA
• 6x SATA and Power Combined Cable
• 1x FlexATX Power Supply
• 2x Slim 12cm Fan (and its Fan guard so the cable does not hit the fan blades)
• 26x m3 Screw - 6mm
• 26x m3 Brass Insert
• 1x Power switch - Round 16mm diameter
• Require about 1.2 - 1.5 KG of Filament depending on your setting

Tools Required:

• Soldering Iron to insert the brass insert for screws
• Hot Glue Gun to glue the SATA Cable for the backplane