TP-Link TL-SG108E Mount for Leviton Structured Media Center

A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with other equipment with similar mounting screw spacing.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

.2mm

Infill:

20%

Filament: 3dSolutech PLA Black

Notes:

I used 3 walls for this to give plenty of material for the #8 screws to bit into. Depending on printing tolerances these holes may need to be drilled out a little