Case display 7" HDMI BigTreeTech
Makes
Comments
I have version HDMI7 V1.2 nothing here fits, the V1.2 has an Audio connector that holds the display from seating in the front part and stops the back from fitting at all. More wasted filament before I realized the STEP 1.2 is not V1.2
@AirheadBit_1652233 I'm reading this too late. I already printed the whole thing. Now my display arrived and I have the same issue. Nothing fits. If there is no update or remix for the new version, I'll create one myself.
Anyone remix this for hdmi5?
I added a lip to the footing to secure it to my desk with a clamp. It works like a charm. :-)
@jonibygg_277348 post your make :-)
@jonibygg_277348 Here are my remake to make it easy to clamp it to my desk. :-)
Upgrading my VCore-3 to VCore-3.1 with enclosuer. Upgraded the controller to the BTT Manta M5P with the CB1 module. The CB1 wouldn't get the correct display resolution from the 7" screen I was using, so had to change to the BTT HDMI7 display, thus needing a new case. This one filled my need. I had to made some mods to it since the enclosure blocks all the 3030 rails I would mount this on. Made a new mount to fit over a corner plate at the bottom.
@Elmo post a remix with your edits, they might be useful for someone else :)
@Jake90 I'll try getting something together here soon. Waiting for the M8 hardware to verify the joint is going to work correctly.