Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix.

If you already printed a bucket without cutouts for magnets, look here.

Because I just couldn't figure out how to mofify a imported .stl I made the files from scratch with Fusion360 by measuring my already printed poop bucket.

----------------------------------------------------------------------------------------------------------------

If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page, thank you very much - it means a lot to me! :)

----------------------------------------------------------------------------------------------------------------

I included a few different magnet sizes, if you need any others just comment them here or shoot me a message.

• Print with:
  • PLA
  • 3 wall loops
  • 15% infill
  • no supports are needed
  • no brim needed

• Additional stuff:
  • Just glue in your magnets into the cutouts.

• Parts:
  • BambuLab_Bucket_Magnets_d%x%mm
    • Check each seperate description for sizes of cutouts.
    • It needs around 350g filament
  • BambuLab_Bucket_Magnets_Slim_d%x%mm
    • Check each seperate description for sizes of cutouts.
    • Depth is 110mm, should be able to better fit in small spaces behind your printers.
    • It needs around 260g filament
       

• Magnets:
  • I have a bunch of those d5x1mm magnets. Depending on the size of the hole i just put the necessary amount in, that ways the magnets are usable more flexible.
  • Here are some d6x3 magnets.
  • Here are some d5x5 magnets.
  • Those are my Amazon ref-links, won't make a difference for you, but helps me :)

• Updates:
  • 2023.02.12
    • Loosened tolerances for magnet cutouts
  • 2023.05.13
    • Moved cutouts one cm to the left. They should be on the metal now
    • Moved Old Files in a new folder
  • 2023.09.16
    • Added more variants

----------------------------------------------------------------------------------------------------------------

I'm looking forward to your comments and makes. :)

Drew it from scratch. Added magnet cutouts for better fit to printer.