Chandelier with two or one sockets

The Chandelier is based on one or two sockets. The Chandelier is modular in the height and number of bulbs (one or two).

Instructions:

Print the elementary parts (4 pieces) for one circle (for descriptions of circles see below) and connection parts (6 pieces) from PETG or ABS.
Left circle is assembled from Parts 1 (2x), 2, 3. Right circle is assembled from Parts 4 (2x), 5, 6.
Glue parts together with all purpose adhesive or cyanoacrylate (see Image) ATTENTION One hole is filled with connection part, the second hole shloud be free, the third is filled with connection part and the fourth is free,....
Glue the circles together.
Install socket.
Install the binding wire (0,6 or 0,8mm) between Chandelier and sockets (see Image).
Enjoy