Openframe1 Full Case

Same case just not spread out in as many prints for those who have larger print beds.

No supports should be needed. You only need 1 type of insert depending on the type of case you make. The hexagonal threaded inserts are for the resin case. The heatset inserts are for the FDM case.

I've added screenshots from jlcpcb.com with recommended materials and all of the .stls needed to make a full case. Keycap .stls have been uploaded with permission from the goat himself (Bjart). Check out his store at https://ko-fi.com/ranalabs .

M3 Heatset inserts for FDM Case: https://www.amazon.com/dp/B09TNK8GD6?ref_=cm_sw_r_apan_dp_YSFETGMWNCHJE1GR02BS&language=en-US

M3 Bolts: https://www.mcmaster.com/94500A262/

5mm + 3mm M3 threaded Inserts for resin case: https://www.amazon.com/uxcell-Male-Female-Motherboard-Standoff-Quadcopter/dp/B08F23855P/

TLDR:

V2:

-- Use Full_Body_nosupport.stl for FDM printing.

-- Use Openframe1_Full_Case.stl for Resin printing.

V3:

-- Optimized for Resin. Should print fine FDM as well

v4:

-- Resin and FDM print. Resin uses some threaded hex inserts. FDM uses some heatset inserts

-- Swapped to M3 screws

-- Thicker backplate to reduce flex

-- physical support for usbc port to relieve some strain on it

V5

--Improved resin model with ribs to alleviate some of the warping that I found in the example model.

-- Keycap .stls uploaded

[1] https://github.com/JonnyHaystack/NoCap

Direct Download Standard: https://github.com/JonnyHaystack/NoCap/raw/master/NoCap_20.64mm.stl

Direct Download Gat_Pro_Silver: https://github.com/JonnyHaystack/NoCap/raw/master/NoCap_20.64mm_GatProSilver.stl

[2] https://cdn.discordapp.com/attachments/896551555526979584/979204857762308166/keycap_20.5_resin.STL

DISCORD LINKS: https://discord.gg/wfwsqqj54h
                                https://discord.gg/URbcxEeck6

Category: Video Games