Peony lampshade

Lampshade to be entered in the "Lights and 3D printing"-contest on the PrusaPrinters-page.
In the contest Lights and 3D printing
51
96
0
920
updated August 25, 2020

Description

PDF

Lampshade to be entered in the "Lights and 3D printing"-contest on the PrusaPrinters-page.

This lampshade was designed based upon a "Peony-rose".

All you need is an IKEA "Hemma" or compatible light-fixture. The lamp can be mounted hanging or standing.

Installation-manual can be downloaded
in English at http://van-opstal.be/peony-lampshade-installation-manual-en
in Dutch at http://van-opstal.be/pioenroos-lampenkap-installatie-instructies-nl

Instruction video at https://youtu.be/MhdVu1LmLJU

Print instructions

All parts can be printed without support.
Print with flat side down.
It is recommended to print (at least the middle part) in a heat-resistant material.
Overhang is limited as much as possible (no more than 65°).
Measure the socket as there seems to be some difference between the standards ...
There is a version for 36 mm sockets and one for 40 mm sockets. (only the first set is different)

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more