Heart Gear

Hello and welcome to my Free Shop on printables.com. My name is Alex from 3d_factorybox and design free 3d models for everyone! Today I want to show you my latest project for the valentines day, the "Heart Gear". The Heart Gear is a box which has 3 rotating hearts that are driven by some gears. You can print it and glue it. It is important that you follow my description how in which way you have to glue it.

Description:
1. mount the gears on the heart poles
2. glue the covers on the heart poles
3. mount the hearts on the gears
4. glue the small gear covers on the gears
5. glue the white heart covers on the hearts
6. ...than the first step is done :) good job!
7. afther mount the heart poles into the brackets and glue them while the heart poles are inside
8. than do it with all three heart poles
9. now you can glue the brackets into the cutout on the bottom of the housing (3 x times)
10. after that you can glue the smaller cutout on the housing
11. at the end you have to glue the big cover on the housing

after all - you did a good job and the model is ready for suprising your valentine! I hope youll enjoy this gift. It would be amazing if you post your makes with my models. In that in mind, your Alex from 3d_factorybox :)