Elegoo Neptune 3 Pro display mount

I needed to place the display of my Elegoo Neptune 3 Pro on the left side. Therefore, I drew an adapter for the original mount. I printed it out of black PLA. 

Required Parts:

•  6 pcs M4 nut 
• 3 pcs M4x10 screws
• 3 pcs original M4 screws 

Assembly:

• Push 3 pcs M4 nuts into the hexagonal holes on the adapter.
• Screw the adapter onto the aluminum profile of the 3D printer using suitable stones. I used only M4 nuts. It is completely sufficient.
• Screw the cover and mount to the adapter using the original screws.
• You can use the cover with the USB stick holder.