U2x30cm Rack 19" server case

U2 Rack 19" 30cm depth server case for ATX based systems

Can be printed on any printer that have 20cm x 20cm print bed.

Small server case for ATX/mATX motherboard and TFX power supply, this case supports only M.2 drives

Assembly requirements

• M3 1.5cm screw for case assembly
• M3 0.5cm screw for motherboard mount
• M3 nuts
• Strong glue(i've used hot glue)
• 3x 60mm fans
• GPIO wires to assembly power button and status leds
• longer than regular M6 screws to mount into your rack

Print recommendations

• DO NOT PRINT WITH PLA,  USE PETG OR ABS
• 0.8mm nozzle and 0.5mm layer height
• 100% infill
• 250% infill speed
• 240 celcius

Printing estimations(with settings above)

• 1200 g plastic
• 20-30 hours

I am not responsible for any damage caused by incorrect use of the housing and/or wrong printing technique