Ciao everyone,
once again I shaped an object I needed.
This Illy Iperespresso capsule stand can hold 27 capsules, 18 in the back container and 9 on the rack.
I printed it in PLA and after a proper scraping, I painted it with a glossy clear coat.
There is nothing complicated about printing, only try to print the rack as pictured below, it will prevent you from quality problems.
I used these parameters:
Perimeters: 3
Top/Bottom: 4
Layer height: 0.2 mm
Infill: Gyroid 10%
As for the Illy logo, you will find 2 different files for each part that includes it, if you have a multicolor printer, you can use the "Flush" files, otherwise use the "Embossed" ones.
I have also added 2 files, to be printed on Prusa MK3, related to the pieces with the "embossed" logo.
As usual, I am at your disposal for any needs or support you need.
Happy printing!
CIAO
Enrico
The author marked this model as their own original creation.