MK3s filament guide V2
Filament guide for MK3s in LACK enclosure. The filaments are located on the lower floor of the enclosure.
156
858
31
6112
updated
August 24, 2020
Description
PDFUpdate:
New version of MK3s filament guide. Reinforced stressed structures, slightly adjusted dimensions (shortening), added area for easier removal of the guide.
Description:
Filament guide is intend for MK3s in LACK enclosure. Filament spools are located on the lower floor of the enclosure.
The idea is based on the Minimal PTFE Tube Guide @matthew, which is, however, too rigid for free movement of the filament from the coil below.
Print instructions
Works: PETG; 0.3 mm; :)
Model origin
The author remixed this model.
