Side Spool Holders for Bambu X1 Carbon remix

I printed the original and found some issues for my situation.  The Bowden tube would not stay in and it was small for larger rolls from Printed Solid.

I added threads so you can use the M4x10 coupler, I had bought some to use for a filament splitter and used the same thing so you can attach Bowden tube without it pulling out.

The first design is almost exactly like the original (I actually made it just using his as a template) only longer.  The second design I made to curve around the edge of the printer.  It uses magnets to help hold it to the side.

I have updated version 2 with two pins, the one wasn't strong enough.  

The .stl is the 2nd curved version, the .3mf is the straight version.

The curve around is in two parts with a connecting bar.  You will need to glue it together.  The pin/bar will help align and give strength to the connection.

I printed in PETG and ABS, you can use PLA. 

2/10/2023 Update

Made adjustments to version two so it will connect better.  Use auto brim and supports, they are minimal.  Also am learning to design so this may not be as professional as others but it works for me and it looks great.  

2/12/2023 Update

made yet another adjustment.  I am using this but found that with some filaments the entrance seems to rough it up.  So made it that Bowden tube will go through and you can just enter it directly into Bowden.  Also made the corner curved.