Medical Walker Ski Feet

Ski type feet to replace the caps on a walker
13
106
0
450
updated February 8, 2023

Description

PDF

There are others out there, but I wanted something a little different. These are easily installed and removed with a screw. My mother-in-law liked them better than the original caps. They help ride over rugs in both directions. They fit a 26mm inside diameter tube. Supports are needed and sanding required for a smooth finish. I made them last year and not sure of the infill, I would probably use at least 30. They are made for a ¼-20 nut and screw 1" long or longer. I did notice they loosened up some over time so check them over a period of time. Made from PLA, 0.2 layer.

Model origin

The author marked this model as their own original creation.

License