Flux & accessory holder for Sturdy Solder Rack

Holds flux dispenser, desoldering braid & other accessories. Connects to Sturdy Solder Rack magnetically. I use 8mm x 2mm disc magnets. 

The flux dispenser I use is a 6ml Repeating Dispenser which works great if you use flux from a can. 

In the pictures, my color breaks are about 6mm and 40mm height. Printed at 0.15mm layers with a 15% infill.  This was done in Hatchbox/Overture PLA with no supports. 

 I've also added 1/16" adhesive foam to the bottom of mine to keep it from sliding around during use.

 This is an original work, inspired by many other designs that I've seen & tried.  I do a lot of work with an iron in my hand, so my tools need to hold up. This continues to be an evolving project.