Dope Data card holder for [ air ] rifle precision rifle shooting scope or RIS Picatinny mount

This is designed for PRL type shooting or any type of target shooting where you need to make notes as you go.

It's designed to hold a standard credit card sized plastic card which are about £10 for 100 on amazon 0.76mm thick (30mil)x- 86 x 54mm
With a card of this size, it should retain nicely but be easy to slide out. 

In addition you will need two M3 screws and nuts to join the connector to the card holder and the connector to the mount. 

Various mounts are included
30mm scope mount
34mm scope mount
RIS fixed for where you can slide the connector onto a rail
RIS split where you want to clamp a rail ( you will need an M4 nut and bolt.)

I have uploaded a full project file which includes the supports I recommend adding, I print on 0.25mm in draft and it comes out just fine

Note you do not need to print both the left and right hand side main body's, just one 

If you like it then please feel free to Buy me a coffee: https://www.buymeacoffee.com/575860607070