Replacement Maxx R-Hop Tensioner 4.5mm (for Maxx HopUp Unit)

An accurate replacement Maxx Model R-Hop Tensioner 4.5mm for Maxx HopUp Unit, with optional rubber nub. 

If you want to use the “sorbothane” version, use the enclosed Sorbothane Cutting Template and a Gillette double-edge razor blade to cut a piece of sorbothane, and glue it to the tensioner.

You can also use the model for ASA+FLEX for a combined material version - just change ASA filament with FLEX (82A or softer) at Z=3mm.

Print on SLA or FDM/FFF using 0.25mm nozzle.