My LED mini articulated lamp
Description
PDFI Designed this mini led lamp after searching DIY lamps on youtube and found this.
I love how Mr. Useful used stuff around the house to make a cool lamp. So i desided to model and print it out.
This lamp uses a 5mm led bulb and it will run off of a 3v coin battery.
I put the amount of what you need to make of each item. Basically one of each accept for the thinner stick you need 2.
I also used magnets in the bottom and top base parts to have easy access.
And if you download this and print it out please upload... I would love to see all the cool ideas you guys use to set up your lamp.
Print Settings
Printer:
Creality cr-10
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
20
Notes:
If you print separately you only need supports on the head and the base top. I printed the head facing up.
Additional parts needed for this project
x3 3mm x 20mm bolts including the nuts
blue lock tight
x1 5mm led solder type led bulb
red and black 22gage wire
at least 3v of battery power
an on off button
x8 1/4'' x 1/16'' Magnets. I got mine here: https://www.amazon.com/gp/product/B072HZ413J/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Super glue
something heavy for the base... I may use a piece of steel and hot glue it in the base.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
