Gift/Message Envelope (decoration text / no text)

What is more romantic/special then a personal (handwritten) message to a loved one?

Use this envelope to deliver such message (or small gift). The accompanying ones have an added decoration in the shape of a heart or rose as an engraving.

See the original model for printing instructions and more examples.

Additional printing instructions for the engraving:

For the color of the hart and the button: change color at 0.8mm (layer 4). "engraving" is 2 layers. With manual color change, set the skirt height to 4 or 5 to start printing the text after the color change without stuttering. For the rose change to green on the 4th layer and to red on the 5th layer (button will be red without additional color change).

Both versions are in 3 different sizes without text.

The ones made special for Valentine's (with added text) remained as originals. The attached project and printfile are of the smallest envelope (valentines version).

Print in PLA, nozzle 0.4mm and layer height 0.2 (also 1st layer!)
Do not scale or use other layer thicknesses, otherwise the fold lines will not work properly.

I was surprised that FilamentStories made a short of the model..