Digital Lava Lamp v1

This is a 3D printed version of Julian Butlers Digital Lava Lamp https://blog.julianbutler.com/2018/12/my-digital-lavalamp-or-mki-epilepsy.html

Instructions for most are above.

The transparent part is broken into 3 pieces for printers that cannot print higher than 120mm

The base is broken into 2 parts (top and bottom) and the transparent tube (when assembled) screws into the base.

I used a 50mm pvc guttering tube to mount the neopixel strips onto and designed a cap for those who want to use 16 pixels per strip rather than the 15 that Julian used) this required some changes to the fadecandy server json file on the raspberry pi and to each processing sketch.

Print Settings

Rafts:

Yes

Supports:

Yes

Resolution:

.2

Infill:

25%-50%

Filament: Geeetech PLA black/transparent Post-Printing =============

Everything is very tight. USB cables required trimming and it seems that not everything fits properly. Will revisit this at a later date.

Screws required:

M3 12mm + nylon nuts x 6

M3.5 12mm x 5

M2.5 x 4