Yoyo Dispenser

With a big collection of yoyos I wanted to make sure I play all of them every once and again but got tired of having to manually dig them out from the drawer to make sure they all got some love. I got inspired by those fridge dispensers for soda cans and designed one that works the same way for yoyos. 

It fits up to 10 yoyos with a width up to 48 mm and a diameter of 60 mm which should be enough for most standard yoyos.

To put it together you need to print:

• First_Pillar x1
• First_Pillar_Mirrored x1
• Second_Pillar x1
• Second_Pillar_Mirrored x1
• Back x1
• Back_Mirrored x1
• Top_Rail x1
• Top_Rail_Mirrored x1
• Bottom_Rail x1
• Bottom_Rail_Mirrored x1
• Connector x6

You will need to print with support enabled.
It was designed with quite big tolerances to accommodate a 0.8 mm nozzle diameter.
Use a dab of glue where each part meets another to make sure they stay together.
It has been designed to fit a 250 x 210 mm bed (Prusa Mk3s), anything smaller won't fit the Bottom_Rail parts.