Ender Stabilizers - Frame braces

Remix of the Ender 5 Stabilizers of dbltrbl023 on Thingiverse. This adds 2 new brace sizes: 259.4mm and 218.1mm

This should fit all 3D printers with 2020 extrusions and a frame with at least ~184mm for the 259.4mm one and ~155mm for the 218.1mm one.

These sizes are used to fit two of the same size on an Ender 5 on the X and Y axes. I'm using M3 screws and T-nuts to secure.

This can be calculated like in the following example:
sqrt( (259.4^2) / 2 ) = ~184

I used 30% gyroid infill, 3 perimeters and 0.32 layer height