Creality Ender Series Low-Profile Filament Guide

Filament guide, designed for filament up to 2mm, to fit Creality Ender aluminium frame extrusions.

This filament guide is not suitable for printers with Bowden tube side-feed extruders, as the frame profile is not a tight fit on the frame of the printer.

Print Settings

Note: It is not recommended to print in the STL included orientation. One of the sides has a 45º flat chamfer rather than the rounded fillet. Print this side down with supports under the frame mount profile. Example GCode included.

The test print photos I have included were printed with the below:

Ender 3 V2, PLA, 205ºC extruder temp, 60ºC build plate temp, 20% infill, supports on, brim build plate on.