DIY LED Bambu Lab P1P - Front/Top Mount

DIY LED for Bambu Lab P1P - Front/Top Mount
 

Sliced .3mf for P1P in PLA. Just load and print.
PLA works fine for me, no problems with heat deformation.
(Some people recognize printing problems, i cant confirm, but let it be a warning to you! Maybe it is better to slice it by yourself, depending on your requirements and filament)

It can be fixed with 2 original Bambu Lab glue strips (or other suitable ones)

You can still use the USB-A connector. It is tricky to connect it while the LED is mounted, so it is recommended to connect it before mounting the LED. 
Or you use the magnetic version:
https://www.printables.com/de/model/415652-diy-led-bambu-lab-p1p-magnetic-fronttop-mount


The  LED connector (GH 1.25) is controllable via printer oder Bambu Studio.
The USB-A connector is not controllable. If you want to you need to and a switch.

What else you need:

- 5V LED Strip (10cm)
for example:
(https://www.amazon.de/dp/B09VGR6PWH?psc=1&ref=ppx_yo2ov_dt_b_product_details)
or:
(https://www.amazon.de/dp/B09SWQPDHC?psc=1&ref=ppx_yo2ov_dt_b_product_details)

- JST GH1.25 2Pin Plug

- cable
 

 Warning!
The LED connector (GH 1.25) on the P1P's AP board is only suitable for 5V and 0.3A !!!!
Make sure that your LED does not exceed these values!

The USB-A Connector is suitable for 5V and 1.5A. Do not confuse!