Phone Stand - Truly no supports!

Yup, here's yet another phone stand. I quickly modeled this after printing a couple phone stands I found on here and they printed like garbage without supports. My goal with this was to print easily without supports, look decent, and stay relatively minimalist.

Print recommendations: See the screenshot from the slicer for optimal print orientation to print without supports. Add a brim if you're printing with ABS/ASA as it's not a ton of surface area on the bed. Standard print settings should work fine. I'm printing it in 0.3mm layer height (with a 0.6mm nozzle to speed up print time), 2 perimeters (3 if using 0.4mm nozzle), and 3 top/bottom layers. 

With 15% infill it is roughly 60g of filament (~20m). Print time with my settings is roughly 2hrs (60mm/s speed).