Laptop stand

Laptop stand with base of various heights.  Can be printed on Prusa Mini+ -- you'll have to rotate the items 45 degrees and print each item separately.

For the full stand, including the bottom (which raises the stand), you need

• 2 x laptop_stand_side.stl (one of which needs to be printed mirrored)
• 2 x laptop_stand_bottom_*mm.stl (the pictures show the 40mm high bottom, i.e. laptop_stand_bottom_40mm.stl)
• 4 x laptop_stand_cross_bar

The model also has indentations for the bumpers, which help prevent the laptop and stand from sliding.  I used 12.7mm x 3mm square bumpers (Amazon).

I tested the stand with a 16" Macbook Pro (2019).

Model was created with OpenSCAD and source is available in the .zip file.  Running make will generate all the STLs.