3D Printable V0 Buildplate With Embedded Magnets

This is a remix of Gulsifer's 3D printable bed for the Rook MK1. I have added voids in the print to fit 3x6mm magnets to hold a flex plate!

The pockets for the magnets are 0.5mm's below the surface. you can either sit and watch your print and manually pause it when it's time to drop in the magnets, or you can set a filament change/pause in your gcode via PrusaSlicer or SuperSlicer. 
 
I have modified the holes to be slightly larger which should allow for easier insertion of the magnets. They may wiggle a bit but that won't effect the functionality. I'm currently testing this design to see if larger magnets are needed for a LDO style flexplate.