Makita Magnetic Bit Holder

Remixed from another creator: https://www.printables.com/model/55510-makita-drill-bit-holder-magnetic

Tested on: DHP485, DHP482, DTD152, DHP486, DDF485, DDF482, DDF486

I have modified the bit holder to take 5x2mm magnets inside the print (picture included), making it less prone to failure and more elegant. I have also increased the hole size ( DIN7985, DIN965 and DIN912 tested ) so that multiple bolt heads fit. The size should be M4 x 12-16 but varies on the bolt head type.  

The model has to be sliced with a M601 command in order for the print to pause and printhead to move away so that you can place your magnets inside. 

You can also download my presliced gcode with the pause option integrated. (For some reason it doesn't play well with my Octoprint setup so I advise printing from SD)

The presliced gcode is sliced for Prusa MK3S+, 0.2mm layer height with Generic PLA. 

The magnets are best placed with opposing polarity so N-S-N-S-N, but either way works. 

The magnets can be purchased here: https://www.aliexpress.com/item/1005001653052311.html?spm=a2g0o.order_list.order_list_main.22.72c61802r3y8xN

If you like the model, please give me a like, thanks :)

Embedded magnets into the print