# Irwin 4.0in Vise Soft Jaws
Printable soft jaws for an Irwin 4.0in vise.
## Description
Not affiliated or endorsed by Irwin.
A set of soft jaws to be printed for working with delicate or prone-to-marring parts.
## Print Instructions
Print the models with the vise-facing face on the bed. (Screw holes or chamfers pointing up.)
* Use 95A shore TPU
* **Layer Height**: 0.2 (0.2 initial)
* **Walls**: 10
* **Infill**: 100%
* **Enable connect layer infill lines**
* **Print Temp**: 230c/0.0c
* **Fan Cooling**: 100%
* **Supports**: No
* **Adhesion Method**: Skirt
## License
No warranty expressed or implied. Use at your own risk. Not for commercial use.
The author marked this model as their own original creation.