Bally A-3944 Drop Target

Quick info

• PET-G, PLA, Nylon+CF (in that order of preference)
• 100% infill 
• Supports on build plate only
• The thinner the layers, the better. (0.2mm will function, I'd personally do 0.1mm)
• This design is unverified and may not function properly, if so please provide feedback

A modified version of a Bally A-3944 Wedge/Wide Top Drop Target for Harlem Globetrotters originally designed by “OutpostKodelia” on Thingiverse, for redditthrowawaykiwi on Reddit. 

Design modifications

• Body thickened beneath the hole for the spring.
• Thickened the spine under the transition from wide-to-narrow.
• All perpendicular-to-plate holes made into hexes for better printing.
• Added 0.2mm filet at wide-to-narrow transition around the half-circle chin.

You may also need to sand the layer lines at the slope, as well as source a good image to print a decal for the front. 

Hope it works out for ya!