Parametric Garage Boxes
Description
PDFHi!
This is a box customizer with a roller door just like a garage.
Youonly need to set the width, height and depth of the box and get the files ready to print.
The door has been designed with tolerances in joints buti recommend doing a first test with the 'test.stl' file, a small piece used for calibration.
The door parts can be dissasembled and/or reconnect with others so you can combine different colors in one door or reusing parts for other boxes.
Also included the STL's for the three parts of a 105x105x105 cube box.
Hope you find it useful!
Have fun!
Print Settings
Printer:
BQ Prusa i3 Hephestos
Rafts:
No
Supports:
No
Notes:
I used 0.3mm resolution for the box, just to save time.
For the door i reccomend 0.15 or 0.2 resolution.About the Customizer
Customizer parameters
Files generated
Disassembling doors
Flex and pull carefully
Combine parts
Make multicolor doors
How to assemble
You need this three parts: box+doorframe
Roll the door over the guides (you may sand the box guides for a smoother roll)
Push the frame.
For stacking many boxes, this is my best solution. It works :)
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.