MX5 Miata Window Crank
Window crank was broken and decided to make a custom one. It will slip right in, maybe with a bit of tight tolerances.
16
84
0
683
updated February 5, 2023
Description
PDFMade this simple crank handle to replace the OEM one in the mean time. I believe I used an M2.5 nut glued on to the “crank knob” and a bolt (may require a small washer depending on the type of bolt used) through the “crank handle”.
A few months in and its still holding!
Printed in ASA.
Tags
Model origin
The author marked this model as their own original creation.
