iPhone Camera Holder for MacBooks

Hey guys, this is a model I have designed to use my iPhone as Face Time Camera for my MacBook. I have designed it for my MacBook Pro 14 inch but it should also fit for any MacBook with nearly the same or less screen thickness like the models since 2018. 
I have designed it for an iPhone 11 Pro Max with a maximum thickness with case of 12mm so it should also fit for every recent iPhone model.

If something does not fit you can of course contact me and I will make a second design.

How it works: Just attach the printed model on your MacBook Display and lay your iPhone inside the large U shaped canal on the backside. 
Please note that orienting your MacBook screen on a lower angle than approx. 70° it is more likely to tipp over with the attached Phone because of its weight. If you have a smaller -> more lighter phone that angle can be lower.

For this model you need about 2h 25min and 18,6g of filament

You can use any filament you prefer. I printed it with Prusament PETG Galaxy Black.

Print settings:

print in 0,15mm layer height 
20% Infill
minimum of 3 perimeter
orientation on the printbed as specified in the screenshot
Support material also as specified in the screenshot

PS: Please make sure that there are no sharp edges on the finished model that can damage any of your devices. If there are any, you can just file them away.

Happy printing!